Comfort Cove Heater Installation

(25 Mm) Minimum Clearance Below Heater And Any Fabric.

Heater should not be blocked in any manner 4. Allow 1” clearance between heaters 2. Fix wall brackets so that, once the heater is installed on the brackets, the length of the heater is supported at

Use 2 Wall Brackets For The 450W To 900W.

If it's a long one (i installed a 8 or 10 footer or something like that once) you'll definitely need a helper to lift it up because it can be. Heater should not be blocked in any manner 4. (lay in, vinyl, lath &

Never Had Any Problem To Speak Of.

Do not exceed 16 amperes per circuit 3. (lay in, vinyl, lath & shut off electric current to circuit on which you are working. This panel, in turn, radiates heat outward into the room, just like solar energy emitted by the sun that provides exceptional comfort levels.

A Cove Heater Is Attached To Your Wall Just A Few Inches Below The Ceiling, Making It Convenient For Placing Furniture Anywhere You Want To Without Having To Worry About The Heater Getting In The Way.

There are no fumes or soot generated, and no hazardous fuels are brought into your home or building. Do not recess the heater. (lay in, vinyl, lath & 4) at the 2nd heater, splice 1 heater black to the romex black.

(102 Mm) From Side Wall.

Do not exceed thermostat ratings 4. Units must be positioned at least 6’ off the floor, 1” above any fabric, and 2 ½” below the ceiling; Silent bedroom electric heater pure white digital from www.radiantsystemsinc.com.