How To Attach A Deck To A House With Aluminum Siding

Then Cut Away The Siding.

[tip] lower the deck to keep snow out. Most hooks are stainless steel, so they won't corrode, and they are easy to remove when you're done with them. My house has wood siding and i would like to know how to attach a wood rail post to the side of the house.

Attaching A Deck To Your House Creates The Potential For Rot, Not Only To The Ledger Board That You Attach To.

Make sure you have enough room to install flashing above the ledger board and allow for at least a ¾” space above the decking, preventing water from wicking upwards into wood siding. How do you attach ledger board to aluminum siding? Do i cut out the siding to fit the post then anchor it to house or do i shim it out and leave the siding?

Next, Slide Drip Flashing Behind The Vinyl So The Lip Fits Over The Top Of The Ledger As Shown At Right.

Gap between the bottom of any doors and the top of the deck boards. This would be the easiest way is accepted by the buyer. This is our most comprehensive v.

Editor's Comments Watch This Video First And Then Read The Comments Below.

In areas with heavy snowfalls, it may be desirable to have the finished deck 1 1/2 inches or so below the sill. Wood or concrete siding will have to be cut away using a circular saw. It slips into the groove between adjoining slats, and once it clicks into place, you can hang items as heavy as 12 pounds.

To Properly Attach A Deck Ledger, Follow These Guidelines:

How to attach a deck to a house with aluminum siding. That way, water and snow melt won’t be able to accumulate and seep under doorsills to ruin interior floors, and storm doors will swing past ice, snow. How to use flashing between vinyl siding and a wood deck.